Best Plywood Manufacturer company in Delhi

What is waterproof plywood?

Most types of wood finally get damaged in case of a stretched practice to water. Conversely good quality waterproof plywood is build in such a way that it offers a better quantity of confrontation to water, compared to normal solid wood or commercial MR score plywood. The cause for this is that a phenolic resin (which is a synthetic plastic resin) is used for gluing all the individual plies together.

What is the grade used to point to waterproof plywood?

The majority country has their own grading scheme. In India, 'BWR grade' plywood means water-resistant plywood. BWR stands for 'Boiling Water opposed to. There is too another comparable sounding grade called BWP (Boiling water proof) which is usually used for marking block boards.

Is waterproofplywood same as Marine plywood?

No. Waterproof plywood (BWR grade) is different from Marine plywood. Marine plywood is specially build so as to resist a prolonged introduction to water. Superiority test for marine plywood involve submerging a sample piece in boiling water for a stage of some hours, and then examination its strength and other properties.

Marine plywood is costlier than waterproof ply and used for marine applications such as for constructing boat and ships. For creation office or house fittings, marine ply is usually overkill, and good quality waterproof plywood serves the purpose in most cases.

There are a number of different types of plywood variants that you can obtain from plywoodmanufacturers in Delhi.

To know more about types of plywood, Visit us: http://www.pineexporters.com/products.htm

Read More

Plywood Manufacturer Company in Delhi

What is Marine Plywood?

Marine plywood is manufactured from strong facade and core veneers, with only some defect so it performs longer in both sticky and wet conditions and resists laminating and fungal harass. It is water opposing and very luxurious. In Marine Plywood developed, glue is mixed with the cross veneer heavily for tight structure bonding and to make it water-resistant.  Due to its water opposed to property, it can be used in outside side beautification. Marine plywood can be use for marine furnishings manufacturing.

Process of Marine Plywood Manufacturing :

To make marine plywood, Gorjon, Pine, Oak etc hard wood is used to make inner sheet of marine plywood. For developed marine plywood, timbers are crossed cut into 8’-6’’ (eight feet six inches) length. Then, the cross cut timbers are debarked and wet into a water tank. Next, the timbers are accomplished peeling by peeler machine to make 8’ feet long (width 2.2mm) cross veneer. Some cross veneer are cut into 4’ (four feet) long for making 8’X4’ size cross sheet. After peeling, the cross veneer are dried through dryer for removing moisture and stacked for after use of making marine plywood.

For making marine plywood, Phenol formaldehyde resin is used. Because, this resin resist water entrance to the plywood and strengthen heavy bonding of the assembling layer. The dried cross veneer (both 8’and 4’ sized) are passed through the glue spreader machine for spreading resin properly. After spreading resin the crosses are dried for 30minutes to remove more wetness. Before glue diffusion, internal piece (thin veneer) is laid on the table and the crosses are laid on the inner sheet one after another. In this way, this step is done several times depends on thickness of marine plywood. After that, this is covered by Aluminum plates and passed into the burning press. After imperative this marine plywood, this is trimmed and accomplished sanding for decorative veneer pasting. Number of Layer of marine plywood depends on thickness of plywood; it may from 6mm to 18mm thickness. Decorative veneers may be Burma teak, Champ, Gorgon, Oak or different kinds of artificial veneer or Rimini veneer. Finally, decorative veneer is applied on both surfaces of raw plywood to make marine plywood.  After that, pressing is done again with hot compress mechanism. Then this marine plywood is proficient sanding, repairing and quality checking for shipment. That’s all for manufacturing marine plywood.

To know more, Visit us: www.pineexporters.com

Read More